Activated by motion-sensing technology, the red dot sight will power up when it senses the required motion. To ADJUST the Motion Activation setting: Press and hold the (-) button until the dot blinks off. Release the button once the objective is clea
The Auto-Shutoff feature will automatically deactivate when left static for the set duration of time. You can set the shutoff time from 1-12 hours or turn the mode off completely. When you first receive the red dot sight, it may be factory set for fo
Make sure you have a fresh CR2032 battery installed in the unit before attempting to activate the unit. To ACTIVATE: Press either the (+) or (-) button. Note: If MOTION ACTIVATION is enabled, you do not need to press any of the buttons to activate th
First, be sure you have a fresh battery installed. Confirm the battery is facing the positive side up and firmly press the battery into the battery holder. Tighten the battery cap back on the red dot sight. Turn the unit on and adjust the brightness
If you are seeing a distortion where the dot is not perfectly round, this may be caused by the way your eye is perceiving the LED’s reflection inside the red dot. Natural astigmatism may cause the dot to appear distorted, it is not just you, almost e